Lennox-hearth 1000 User Manual

Report No. 317-F-10-5INSTALLATION AND OPERATION MANUALDo not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any

10 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE14.0 CHECKING THE BURNERThere are no imitation fuel bed components, such as logs or ro

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE1116.0 CHECKING THE GAS CONNECTIONSTurn on gas supply and test for gas leaks using a gas leak test

1218.0 SPARK GAPThe gap between the spark electrode and the pilot should be 1/8” to 3/16” to produce a good spark. There should be no need to adjust

13 WARNING Any change to this heater or its controls can be dangerous. WARNING No adjustments are to be made to the ODS pilo

14 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE21.0 CATALYSTS WARNING Do not block the catalysts or the appliance outlet grill. Blockage m

15FOR YOUR SAFETY READ BEFORE LIGHTINGWARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAYRESULT CAUSING PROPERTY DAMAGE,

1624.0 TROUBLESHOOTING GUIDEPROBLEM CORRECTIVE ACTIONIgniter sparks but pilot does not light • No gas to Pilot, check the gas line connections.• Ai

1725.0 REPLACEMENT PARTS - X-FIRES-10005415HardwareNOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE1212567810111314See ordering instructions on Pag

1826.0 POSITIONING OF FIELD REMOVABLE PARTS WARNING Failure to position the parts in accordance with these diagrams or failure to use only p

1927.0 SPECIFICATIONSNOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALEX-FIRE-1000 Surround KitsCat. No. Model Description Ship. Wt. Ship. VolumeH722

21.0 IMPORTANT SAFETY AND WARNING INFORMATION WARNINGSIf the information in this manual is not fol-lowed exactly, a fire or explosion may result ca

Printed in U.S.A. © 2007 Lennox Hearth ProductsP/N 506023-01 REV. B 11/2008Lennox Hearth Products reserves the right to make changes at any time, w

32.0 GENERAL INFORMATIONThis appliance is a high efficiency, unvented, flame effect gas heater. It provides radiant and convected warmth both efficientl

46.0 BURN-IN PERIODOn initial light up of a new appliance, the ‘newness’ will burn off within the first few hours of operation. During this period some

58.0 COMBUSTION AND VENTILATION AIRThis heater shall not be installed in a confined space or unusually tight construction unless provisions are provide

69.0 SITE REQUIREMENTSThis appliance is designed to be wall-hung. Do not recess any part of the appliance into the wall.This appliance may be installe

7Non-concealed gas connections may be made using the entry points at either end of the firebox or the one in the bottom of the firebox. A concealed gas

8 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALEAfter having selected the final mounting position of the appliance, taking into account the site

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE9It is recommended that the burner height, where possible, should be approximately 4 ft